Devices

View Edit Device Name Version/Catalog# Manufacturer Description
View 0.45um porous PET transwell 6.5mm 24 well plate Corning 3470 Corning 6.5 mm Transwell® with 0.4 µm Pore Polyethylene terephthalate (PET) Membrane Insert, Sterile Pore Density: 4x10⁶ pores per cm² Membrane diameter: 6.5 mm Cell growth area: 0.33 cm² Packaged 12 inserts in a 24 well plate.
View 10 cm plate
View 12-Well Plate Falcon (Corning) A custom-made PDMS mold is placed in each well. The engineered muscle bundles are placed between the beams of a Cerex frame pinned onto the molds. Once, the myobundles are polymerized in the mold for 30 min, they can be cultured in growth media on a rocker (0.33 Hz) at 37°C. On day 4, the media can be switched to differentiation media, and the molds removed leaving the myobundles that are still attached to the frames in the media.
View 192-well microDUO Onexio Biosystems 384 well plate platform for high-throughput co-culture and multi-culture applications. This system allows each cell type to be cultured in a well with a media bridge to allow paracrine communication. When media volume is >25μl results in bridged wells and communication between adjacent wells. This version of the well plate is useful for experiments where individual wells cannot be analyzed.
View 24 Well BioCoat-COL Transwell 354541 Corning Corning® BioCoat® Collagen I Permeable Supports with 3.0 µm PET Membrane in two 24-well Plates, 12/Pack, 24/Case Product Number 354541
View 24 Well Fabricated Osteochondral Construct 1 University of Pittsburgh Center for Cellular and Molecular Engineering The 3D structures of the bioreactor were modeled using Magics 14 (Materialise, Belgium). The chamber and insert were fabricated using a stereolithography apparatus (EnvisionTec, Germany) employing e-shell 300 as the resin. A multichamber bioreactor was fabricated and fitted into a microfluidic base. When the osteochondral construct is inserted, two chambers are formed on either side of the construct (top, chondral; bottom, osseous) that is supplied by different medium streams. These medium conduits are critical to create tissue-specific microenvironments in which chondral and osseous tissues will develop and mature.
View 24 Well Plate 0.01 SBS Standard Plate
View 24 Well Transwell 0.45 micron pore sized PET membrane transwell
View 2UP Gener8 The LATTICE platform consists of two elements that are placed in a incubator, a LATTICE culture plate (2UP or 8UP) and a compatible base station, in the 2UP plate up to 2 organ models can be cultured in interconnected culture wells while up to eight organ models can be cultured in the 8UP version. The base stations contains the necessary components to engage and interact with the plate and drive the microfluidic flow and is controlled by proprietary software on a PC. The 2UP base station has one valve mechanism while the 8UP base station has six, as well as several sensors making it compatible with automatic handling.
View 384-Well Clear Flat Bottom Microplates TC-Treated White Polystyrene 3707 Falcon (Corning) White 384-well polystyrene microplate has clear flat-bottom square shaped wells with a well volume of 112µL and a recommended working volume of 20 to 80µL
View 384 Well Plate SBS Standard Plate
View 384 Well Plate Optilux Black/Clear Flat Bottom 353962 Falcon (Corning) SBS Standard Plate.Glass coverslip on bottom
View 384 Well Plate Polystyrene Greiner BioOne
View 384-wells microDUO Onexio Biosystems 384 well plate platform for high-throughput co-culture and multi-culture applications. This system allows each cell type to be cultured in a well with a media bridge to allow paracrine communication. When media volume is <12.5μl, cells are cultured as a discrete culture. Adding media to >25μl results in bridged wells and communication between adjacent wells.
View 48 Well Falcon Polystyrene Microplate 08-772-1C Falcon (Corning) Constructed of crystal grade virgin polystyrene for optimum visibility.
View 48 well PerfusionPal Plate PP-A048-0001 Lena Biosciences
View 48 Well Plate
View 6 Well BioCoat-COL Transwell 354540 Corning Corning® BioCoat® Collagen I Inserts with 3.0µm Pore Polyester (PET) Membrane in four 6-well Plates, 6/Pack, 24/Case Product Number 354540
View 6 Well Plate [Generic] Generic entry for a six well plate
View 96-half-well plate (micro-patterned) MHCRX-AA-0096 Stemonix A black 96-well plate with half-sized wells and a micro-patterned culture surface.
View 96 Well Flat Clear Bottom Black Polystyrene TC-Treated 3603 Falcon (Corning) black walled, clear bottom, 96 well plate
View 96 well Plate Falcon (Corning) LAMPS models constructed in 96 well plate format
View 96 Well Plate SBS Standard Plate
View Edit 96 Well Plate Clear Flat Bottom 353072 Falcon (Corning) Falcon® 96 Well Clear Flat Bottom TC-Treated Culture Microplate, with Lid, Individually Wrapped, Sterile
View 96 well plate flat clear bottom 96 well plate with flat optically clear bottom, for cell culture and fluorescence imaging
View 96 Well Plate Glass Bottom InVitro Scientific SBS Strandard
View 96 Well Plate Polystyrene 655097 Greiner BioOne Mid binding
View 96 Well Plate Polystyrene (High Binding) 655096 Greiner BioOne 96 Polystyrene Micro Plate
View 96-Well U-Bottom Plate
View Atrial MEA MED-P545A MED64 This glass microelectrode array (MEA) contains a single well with an 8x8 array of electrodes. Surrounding the electrode cluster is a PDMS ring that aids with cell seeding.
View BioFlex Silastic plate
View Body on a Chip Microfluidic Hesperos The device was produced with two outer housing layers of 0.25” thick transparent poly (methyl methacrylate) (McMaster-Carr, Elmhurst, IL, USA) and two 0.5 mm thick gaskets of CultureWell™ silicone (poly (dimethyl siloxane) PDMS) sheet material (Grace Bio-labs, CWS-S-0.5, Bend, OR, USA) to define the flow path and define positions of the chips. The versatile microfluidic design contains five chambers for the expansion to additional tissues.
View Cardiac MPS Scaffold UC Berkeley A minimal organoid structure of the heart composed of three components: a central cell chamber, two adjacent media channels, and an array of connecting micro-channels.
View Cardiac tissue chip Cardiac tissue chip for cardiac tissue culture for forming geometrically insulated cardiac tissue node
View Cell Culture Flask A generic device that represents any unknown cell culture flask for adherent cells.
View Chip Unspecified Chip design
View ChipShop Fluidic 557 10000826 ChipShop catalog 1000826 pg 54 2022 catalog
View Circulation Pump Vanderbilt U Mechanical Pump
View CNBio - T12 plate T12 CNBio This plate contains 12 spaces to add Tranwells (0.3cm2 diameter), and continually perfuses cell culture medium in the basolateral chamber.
View Corning 384 well microplate, low flange 3764 Falcon (Corning) matrix active group TC-Treated, black polystyrene, flat bottom, sterile, lid
View Corning 96 well Transwell 7369 Corning Corning 96 well Transwell 0.4 um PET membrane
View Costar 12-well Transwell CLS3460 • 10μm thick transparent polyester membrane • Treated for optimal cell attachment • Packaged 12 inserts in a 12 well plate, 4 plates per case • Excellent visibility under phase contrast microscopy • Sterilized by gamma radiation Transwell cell culture inserts are convenient, easy-to-use permeable support devices for the study of both anchorage-dependent and anchorage-independent cell lines They feature a 10 mm, thin, microscopically transparent polyester membrane that is tissue culture treated for optimal cell attachment and growth.
View Costar 24-well Transwell 3470 Falcon (Corning) 6.5mm Transwell® with 0.4µm Pore Polyester Membrane Insert, Sterile (Product #3470) • 10µm thick transparent polyester membrane • Treated for optimal cell attachment • Packaged 12 inserts in a 24 well plate, 4 plates per case • Excellent visibility under phase contrast microscopy • Sterilized by gamma radiation
View Cross Flow Membrane Chip 15-1506-0480-02 ChipShop
View Demo-Device Device appropriate for use in generating data used in demonstrations and training.
View Ebers Transflow Device REF 200 008 Ebers Ebers TransFlow Chip
View Eppendorf Tube 1.5 mL 022363204 Eppendorf Eppendorf consumables are the result of over 50 years constant improvement and development. The portfolio of tube products is no exception. Flex-Tube®, with its easy-close design provides ergonomic and reliable one-handed operation. The well-known Eppendorf Tubes 5.0 ml represents the optimal option for dealing with samples volumes that are medium in size. Safe-Lock Tubes are hinged at the lid to provide outstanding protection against unintentional opening during storage and incubation. Protein LoBind tubes are designed specifically for use in proteomics and other areas of protein research. The amount of protein recovered from Protein LoBind tubes is significant for downstream analyses, and the enzymes remain active. Source: https://www.sigmaaldrich.com/labware/labware-products.html?TablePage=17195237
View Fabricated Osteochondral Construct 4 in Series 1 University of Pittsburgh Center for Cellular and Molecular Engineering
View Falcon 15mL Conical Centrifuge Tube 14-959-53A Falcon (Corning) Tested to withstand centrifugation of 12,000 RCF (polypropylene) or 1,800 RCF (polystyrene) in a fully supported rotor with room temperature water. Corning™ Falcon 15mL Conical Centrifuge Tubes are ideal for cell centrifugation; pelleting; separation by density gradients.
View Feto-Maternal interface (FMi) Organ-on-Chip (FMi-OOC) V1 Arum Han Lab at Texas A&M University The FMi-OOC is composed of four concentric circular cell/collagen chambers designed to mimic the thickness and cell density of the FMi in vivo. Each layer is connected by arrays of microchannels filled with type IV collagen to recreate the basement membrane of the amniochorion.
View Fiber infused gel substrate
View Flow-Enabled Photonic (PPhRR) Biosensor 1 The photonic biosensor is packaged into a single channel microfluidics stack resting on a temperature-controlled staged where pressure-drive microfluidic flow is provided by an external pump through peristaltic tubing. The sensor is fabricated by AIM Photonics Foundry, the PSA is made by 3M and the silicone tubing is made by Cole Parmer.
View GBM2019
View Generic Slide
View Geometrically insulated cardiac tissue chip
View HeLiVaSkCa Bone Cancer Module Columbia University 12 well plate to hold bone scaffolds
View HeLiVaSkCa Skin Module Columbia University Skin module of Columbia's HeLiVaSkCa system
View Horizontal 8 Well Eight well plate that consists of two columns of four wells
View Ibidi u-slide I^0.1 Luer ibidi Channel slides with different heights, volumes, and coatings
View Ibidi u-slide I^0.2 Luer ibidi Channel slides with different heights, volumes, and coatings
View Ibidi u-slide I^0.4 Luer ibidi Channel slides with different heights, volumes, and coatings
View Ibidi u-slide VI 0.1 ibidi A six channel µ-Slide for parallel flow assays
View Ibidi u-slide VI .4 ibidi A 6 channel μ-Slide suitable for flow experiments
View Ibidi u-slide VI-Flat ibidi A 6 channel μ-Slide suitable for flow experiments
View In vivo
View IQue Flow Cell Sartorius The iQue® advanced flow cytometry platform utilizes a fixed wide dynamic range allowing for the collection of both the phenotypes and functional analysis of secreted cytokines simultaneously, eliminating the discrepancy of different time points or the need to split samples for subsequent analysis.
View KOALA-PDMS A passive pumping microfluidic chip with up to sixty parallel channels molded with PDMS placed on a plastic/ glass substrate for capture and analysis of immune cells from blood using bright field/ fluorescent microscope imaging.
View Lattice 2UP 2UP Gener8 The LATTICE platform consists of two elements that are placed in a incubator, a LATTICE culture plate (2UP or 8UP) and a compatible base station, in the 2UP plate up to 2 organ models can be cultured in interconnected culture wells while up to eight organ models can be cultured in the 8UP version. The base stations contains the necessary components to engage and interact with the plate and drive the microfluidic flow and is controlled by proprietary software on a PC. The 2UP base station has one valve mechanism while the 8UP base station has six, as well as several sensors making it compatible with automatic handling.
View Lattice 8UP 8UP Gener8 The LATTICE platform consists of two elements that are placed in a incubator, a LATTICE culture plate (2UP or 8UP) and a compatible base station, in the 2UP plate up to 2 organ models can be cultured in interconnected culture wells while up to eight organ models can be cultured in the 8UP version. The base stations contains the necessary components to engage and interact with the plate and drive the microfluidic flow and is controlled by proprietary software on a PC. The 2UP base station has one valve mechanism while the 8UP base station has six, as well as several sensors making it compatible with automatic handling.
View LC-CP CNBio
View Liver Acinus Device v1.0 MGH-0001-01 MGH
View Liver Acinus Device v1.1 0.01 MGH A microfluidic 2-layer 3-D biomimetic liver sinusoid module
View Liver-MPS (LC12) Consumable Plate CNBio Three dimensional (3D) scaffolds, embedded in each of the wells, are continually perfused by cell culture medium during experiments. ​ The MPS-LC12 consumable plates are designed to create optimal conditions for primary human hepatocytes and non-parenchymal cells (NPCs). Human primary liver cells are cultured in 3D microtissues on an engineered scaffold which mimics the architecture of the liver capillary bed under perfusion. The MPS-LC12 plate can also be used to culture other tissue types, precision cut tissue slices or organoids in a perfused 3D format.​
View LumeNEXT University of Wisconsin-Madison A single luminal structure embedded in a hydrogel. LumeNEXT, lumen structures are created by utilizing a removable PDMS rod placed in a PDMS chamber. The chamber is filled with an unpolymerized collagen solution that is subsequently polymerized. Once the ECM is completely polymerized, the PDMS rod is removed without disrupting the integrity of the surrounding ECM gel, creating a lumen structure that mimics the geometry of the PDMS rod.
View MatTek 24-well Plate MatTek Plasticware for MatTek EpiDerm systems
View Mattek Epi-Intestinal SMI-100 MatTek The Mattek Epi-Intestinal model is based on human small intestinal cells (ileum) differentiated after being seeded onto permeable supports under air-liquid interface culture conditions. This commercial model has been well characterized and is available in different formats, including a “full thickness” model in which gut cells are grown on top of a smooth muscle epithelial layer, or a “partial thickness” model with just the gut epithelial cells.
View microfluidic chips version 1
View microfluidic chips version one
View microJoint University of Pittsburgh Center for Cellular and Molecular Engineering
View Micronit OOC 3 layer assembly in glass and plastic
View Micronit OOC 0.45um porous 12um-membrane 7x14mm oval Micronit 3 layer assembly in glass Top and bottom layer with silicon casket Middle layer with PET membrane
View Micronit OOC 3um porous 20um-membrane 7x14mm oval Micronit 3 layer assembly in glass Top and bottom layer with silicon casket Middle layer with PET membrane
View Micronit OOC 3um porous 9um-membrane 7x14mm oval Micronit 3 layer assembly in glass Top and bottom layer with silicon casket Middle layer with PET membrane
View Micronit OOC 3um porous 9um-membrane 8x16mm oval Micronit 3 layer assembly in glass Top and bottom layer with silicon casket Middle layer with PET membrane
View Micronit OOC small oval Micronit 3 layer assembly in glass Top and bottom layer with silicon casket Middle layer with PET membrane
View Micronit OOC two-organ (Biomimetic and organoid) series coupling Micronit 1 Micronit 4 chip holder 2 pairs of 3 layer assembly in glass -Top and bottom layer with silicon casket -Middle layers with oval and PET membrane --1 Middle layer oval (7 x14mm) and PET membrane of 0.45um porous 12um thick (for Biomimetic MPS) --1 Middle layer oval (8 x16mm) and PET membrane of 3um porous 9 um thick (for encapsulation of organoids) System is perfused through the top and bottom chambers inlets of the upstream MPS (port 8 and 11). Bottom chamber from upstream MPS is collected through the corresponding outlet (port 2). The top chamber of the upstream MPS (port 5) feeds into the inlet of the top chamber (port 8) downstream MPS. Medium flows through the top chamber and loops (port 5 to 2) into the bottom chamber, with medium collected through the bottom chamber outlet (port 11) of the downstream MPS.
View Mimetas 3-Lane Organoplate 4004-400-B Mimetas Based on a 384 well plate format, 40 chips per plate, each chip is comprised of 9 wells.
View Mimetas OrganoPlate 9603200B 384 well plate using 4 wells for each functional unit
View Mimetas Organoplate 400 9603400B Mimetas Two lane organoplate with 2 ul volume
View Modular human Tendon on Chip V1 The modular hToC was designed by integrating an ultrathin (100nm) dual-scale (50 nm at 20% porosity with dispersed5 μm pores) silicon nitride membrane (μSiM) into an acrylic-based top component which attaches to a bottom channel through pressure-sensitive adhesive. Two ports on either end of the top component connect to the bottom layer which contains a channel with two rigid horizontal acrylic anchors at either end to provide static axial strain to the tenocyte-embedded TeleCol-3hydrogel.
View Moore Lab Dual Hydrogel Culture System Moore Lab at Tulane University
View Mouse
View Muscular Thin Film
View Muscular Thin Film (MTF) Muscular thin film (MTF) is an engineered tissue construct, serving as a minimalist system for myogenesis and contractile property readout. MTFs are composed of two layers, one is a supporting layer of biomaterials, the other is a layer composed of muscle cells. The biomaterials can be engineered to provide biochemical and topological cues, so the muscles cells can adhere and assemble into aligned tissue, which truthfully recapitulate their native structure in vivo. This bilayer enables the assessment of contractile stress of muscle tissue in vitro. The contractile force generated by the muscle layer causes the entire film to bend. Based on Stoney’s equation, the resulting curvature of the thin film is used to determine the systolic and diastolic stress from the muscle layer (Feinberg, Feigel et al. 2007, Grosberg, Alford et al. 2011, Shim, Grosberg et al. 2012, Sheehy, Grosberg et al. 2017). External electrical field stimulation can be used to control the frequency of tissue contraction, thus enabling the measurement of stress relationship with frequencies, an important electrophysiological feature.
View Myobundle Frame Duke University Frame, when combined with a Matrigel mold, that allows for the growth and support of myobundles. The frame is placed into another container (typically a well in a 24-well plate) that submerges the frame in the various media needed for MPS formation and testing. Each frame can have a maximum of four functioning myobundles.
View NeuroHTSTM microplate ANANDA Devices
View Neurovascular Unit Vanderbilt U Dual chamber system separated by porous 0.2µm pore polycarbonate membrane. Flow through each chamber. There is a vascular chamber that is 2.91 microliters and a brain chamber that is 17.5 microliters. The device thickness is between 4.5-5.5. mm and the substrate thickness is between 3.5-4.5 mm.
View NMJ BioMEMS system
View Nortis Dual-channel Chip Nortis PDMS and glass device with 2 parallel tubules for seeding 2 separate lumens within the same chip.
View Nortis Par-V1 Par-V1 Nortis PDMS with plastic casing and glass cover slip on bottom Prototype Nortis device. Released as "Har-V1" when commercialized
View Nortis Single Chamber SCC-001 Nortis Single chamber flow through module Named Har-V1 to indicate that this device is the commercial version of the prototype Par-V1 device
View Nortis Single chamber (v0.9) 0.9 Nortis
View Nortis Triple Chamber TSC-001 Nortis Triple chamber flow through module Named Har-V1 to indicate that this device is the commercial version of the prototype Par-V1 device
View Nunc MicroWell 96-Well [High Flange] 167008 ThermoFisher 96F well plate, Nunclon Delta, clear, with lid, Sterile (Pack of 1, Case of 50)
View NVU
View OrganoPlate® 2-lane 96 9605-400-B Mimetas -96 independent tissue culture chips -2 adjacent channels per chip -Direct access to apical lumen of tubular cultures Each chip contains one in-gel culture channel and one perfusion channel. This enables the culture of perfused tubules adjacent to an extracellular matrix (ECM) of choice without artificial membranes. With direct access to the apical lumen of tubules, the platform enables perfusion and addition of cells, compounds, and stimuli. https://www.mimetas.com/en/organoplate-2-lane-96/
View Osteochondral tissue chip
View PDMS chip with electrodes V600 Micro-gRx Microfluidic chip fabricated from PDMS and bonded to glass. Platinum electrodes were embedded along the media channel and extended 3.2 mm outside the PDMS for attachment to connectors and a pulse generator during electrical stimulation. The PDMS chip featured an inner channel 3.2 mm wide aligned with tapered surface-tension pins set 0.3 mm apart and two PDMS posts of 1 mm diameter spaced 5 mm apart (center to center)
View PDMS chip without electrodes V600 Micro-gRx Microfluidic chip fabricated from PDMS and bonded to glass. The PDMS chip featured an inner channel 3.2 mm wide aligned with tapered surface-tension pins set 0.3 mm apart and two PDMS posts of 1 mm diameter spaced 5 mm apart (center to center)
View Private device Marketing demo device
View Reservoir Media collection
View Rhombic Chamber Chip 10/10uL 12-0942-0134-01 ChipShop Multiple Chambers in pairs 60/40/20/20/10/10
View Rhombic Chamber Chip 24uL 12-0938-133-05 ChipShop
View Roper_perfusion_multi_islet v1 Florida State University 400 um x 200 um x 5 cm (width x depth x length) channel in a PDMS block that is irreversibly bonded to a glass slide. The inlet and outlet have a hole punched out for tubing using a 0.508 mm diameter titanium nitride hole punch. In the middle of the channel, another hole was made using a 400 um diameter punch. This central hole was used to add / remove islets. This hole is covered with PCR tape during experiments.
View Single-Use RED Plate for 48 Samples ThermoFisher Single-Use RED Plate with Inserts, 1 plate For processing 48 samples per plate. For use in Rapid Equilibrium Dialysis (RED) Device System
View Small Airway Chip (UPenn) UPenn (Huh Lab) A 2-layer PDMS chip with a top and bottom chamber separated by a sectioned transwell membrane (0.4uM pore size, polycarbonate). Each chamber is independently fed through an inlet and outlet that allows for gravity flow through the chip. After seeding, the media from the top chamber is removed, bringing cells on the top of the membrane to ALI (Air liquid interface).
View T18 Platform OAZY154 CNBio 18 Well Transwell Plate 200 uL Apical volume 1000 uL Basal volume
View Takayama Lab Kidney Device Takayama Lab Two channel PDMS device separated by a porous polyester membrane (0.4mm pores; 10µm thick) from a Corning transwell plate.
View TEBV Chamber Duke University
View Tissue Engineered Ventricle
View UCB Liver Sinusoid Device UC Berkeley A device to model the liver sinusoid
View UCIVTM UC Irvine The platform is custom-fitted into a standard 96-well plate format. The design consists of two polydimethylsiloxane (PDMS) layers assembled to a commercial 96-well plate (FLUOTRAC™ 600, Greiner Bio-One) with the bottom of specific wells removed to align with the platform. The 2 mm thick middle layer consists of 12 microfluidic device units (denoted as the PDMS device layer) and the bottom layer is a thin transparent polymer membrane (HT-6240, Rogers Corp). Since liquid evaporation at the corner and edge wells is faster than the inner wells of 96-well plates, only 12 microfluidic device units (U1–U12) are usually arrayed within the inner well area to ensure optimal culture condition. For a single unit, 6 horizontal wells (W1–W6) are utilized. The tissue unit consists of 3 tissue chambers (T1–T3) positioned within the footprint of a single well, with one gel loading inlet (L1) and outlet (L2) located at two additional wells
View UR-MicroBubble University of Rochester The MicroBubble (MB) cavity array technology is used as a high-throughput, modular platform. MBs are micron-scale spherical cavities molded in polydimethylsiloxane (PDMS) using gas expansion molding technique. Each spherical MB well has a 100 μm diameter circular opening in the upper third of the well and ~8 nL volume.
View UW-Single Chamber Kidney Chip 0.01 Nortis Single channel kidney module
View WAT-Chip UC Berkeley The multilayer WAT-chip consists of two patterned polydimethylsiloxane (PDMS, Sylgard 184) slabs sandwiching a polyethylene terephthalate (PET) membrane (rP = 3 μm; ρP = 8 × 105 pores per cm2). The upper PDMS layer features the WAT chamber (green) and the lower one the media channel (red).Multiple cell chambers can be connected in series or in parallel to create different circulation architecture
View Whole thermoplastic chip-1
Loading...